Samsung SPH-M840UWABST - Manual (Page 52)

Wi-Fi Settings
Set up and manage wireless access points.
1. Press , and then tap Menu > Settings
> Wi-Fi .
2. Tap Menu > Advanced to configure:
� Network notification : When enabled, your phone
notifies you of Wi-Fi networks when you launch a
high data-usage application.
� Keep Wi-Fi on during sleep : Specify when to switch
from Wi-Fi to mobile data for data
communications, when the phone goes to sleep
(backlight goes out and screen locks). This
setting can affect your data usage, and the
behavior of devices connected to your phone.
� Wi-Fi timer : Choose a starting and ending time for
your phone’s Wi-Fi service to remain on.
� MAC address : Your phone’s unique identifier, used
when connecting to Wi-Fi (not configurable).
� IP address : Your phone’s IP (Internet Protocol)
address (not configurable).
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other
directly via Wi-Fi, without a Wi-Fi network or hotspot,
and without having to set up the connection. For
example, your phone can use Wi-Fi Direct to share
photos, contacts and other content with other Wi-Fi
Direct devices.
Your phone’s Wi-Fi feature must be turned on to
configure Wi-Fi Direct.
1. Press , and then tap Menu > Settings .
2. Touch Wi-Fi to turn Wi-Fi On.
3. Touch Wi-Fi Direct at the bottom of the screen. Your
device automatically scans for nearby Wi-Fi Direct
devices, or you can touch
Scan to start scanning.
2C. Settings 43