Samsung SGH-A827DKAATT - Manual (Page 131)

Changing Your Settings 128
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic
Class.
– Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
– Local Phone IP: allows you to configure the local phone IP address.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class.
Note: The WAP settings may vary depending on the service provider.
Configuring your Phone’s USB Mode
Your phone can connect to a PC via the USB cable (sold
separately). The phone can be configured to launch a default
application when an active USB connection is detected.
Note: The Bluetooth feature must first be disabled before initiating a USB
connection with the phone. Prior to connecting the USB cable to the
phone, install the latest version of the PC Studio application. This
application installs the necessary USB drivers onto your machine.
1. Use the USB adapter cable to connect the handset to the
target PC. When an active connection is established, a USB
icon ( ) displays on the screen.
2. At the Idle screen, select Menu ➔ Settings ➔ Set
Connectivity ➔ Select USB Mode and press the key.
3. Use the Up or Down Navigation key to highlight one of
these options:
• Ask on Connection: requires the phone to present a “Select USB
Mode” pop-up which requires you to assign a default USB
application.
• Media Player: sets the Media Player to launch as the default
application when a USB connection is detected. This is the default
application when the phone is initialized, but can be reset to one of
the other options.
• PC Studio: can be set to launch PC Studio as the default
application when a USB connection is detected. For a free
download of PC Studio, go to www.samsung.com.
• Mass Storage: sets the USB connection to a mass storage device
such as a zip drive. Mass storage is available only when a micro-SD
card is inserted.
4. With the application highlighted, press the Save soft key or
the key.
IMS Settings
IMS is the method used to connect to the server in order to set up
Video Sharing.