Installing the microsd™ card – Samsung SGH-A827DKAATT User Manual

Page 9

Advertising
background image

Getting Started 6

Caution!: For connection to an electrical supply not located in the U.S., you

must use an adaptor of the proper configuration for the power
outlet. Use of the wrong adaptor could damage your phone and
void your warranty.

1.

Plug the connector of the travel adaptor into the jack on

the side of the phone.

Caution!: The previous illustration shows both the correct and incorrect

method for connecting the charger. If the incorrect method is
attempted, damage to the accessory port will occur therefore
voiding the phone’s warranty.

2.

Plug the adaptor into a standard AC wall outlet.

Important!: The battery charging function may stop if you are on a call or

viewing a streaming-video while charging your battery.

3.

When the phone is completely charged (the battery icon is

not animated), unplug the adapter from the power outlet.

4.

Remove the adapter from the phone by gently pulling the

connector out.

Important!: You must unplug the adaptor before removing the battery from

the phone during charging to avoid damage.

Installing the microSD™ Card

To add additional memory to your phone, you can insert a
microSD™ card into the side of the phone. Use the following
instructions and illustrations for proper insertion and removal.

1.

Open the side slot to insert the card. Place the microSD™

card into the slot.

2.

Push the microSD™ card into the slot until it clicks into

place.

Note: Please note that the side with the gold contact pins should be facing

down when inserting the card.

+

Incorrect

Correct

Advertising