Samsung SGH-A827DKAATT - Manual (Page 30)

27
• Total Received Data: shows the size of the total data packet
(measured in KB - kilobytes) which have been received by the
phone since the last time this counter was reset.
3. To reset the value of these counters, select the desired
option and press the Reset soft key.
Note: If this is the first time you have attempted to reset the value of the
counters, you will be prompted to create a New Password. Afterward,
you will be prompted to enter the password you created.
4. Enter the password and press the Confirm soft key to reset
the selected option.
5. Press the Back soft key or the key to end.
Data Call Time
1. In Idle mode, press the Menu ➔ Recent Calls ➔ Data Call
Time and press the key. The following options are
available:
• Last Data Call: shows the time used for the last data call sent or
received since the last time this counter was reset.
• Total Data Call: shows the total time used to send or receive data
since the last time this counter was reset.
2. To reset the value of these counters, select the desired
option and press the Reset soft key.
Note: If this is the first time you have attempted to reset the value of the
counters, you will be prompted to create a New Password. Afterward,
you will be prompted to enter the password you created.
3. Enter the password and press the Confirm soft key to reset
the selected option.
4. Press the Back soft key or the key to end.
Silent Mode
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater for example. For more information,
refer to “Other Available Profiles” on page 116.
In Idle mode, press and hold the key until the phone
vibrates, and the “Silent Profile on” message displays on screen.
Either the Silent mode icon or Vibrate icon displays on
screen.
In Silent mode, your phone’s speakers are muted. The phone
vibrates and lights up the display, or just lights the display,
depending on the settings of the Silent Phone Settings feature.
To exit and reactivate the previous sound settings, press and hold
the
key again until “Normal Profile on” displays. The Silent
mode or Vibrate icons no longer display.