Samsung HG28NC673AFXZA - Manual (Page 13)

13
English
¦ Menu Items
To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER E buttons in order.
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item initial Value Description
Hospitality
Mode
Hospitality Mode Standalone
Select Hospitality mode.
y Interactive mode : TV works with an SI STB or SBB.
y Stand-alone mode : TV works alone, without an SI STB or SBB.
SI Vender SI Vendor OFF
y Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /
Guestek / Seachange / EBL
y Stand-alone mode : OFF / Smoovie
Power On
Power On Channel Last Saved
Set the default values that will be applied when the TV is turned on.
y User Defined : Lets you set Power On Channel and Channel Type manually. See
Power On Channel and Channel Type below.
y Last Saved : If you select this item, when the TV is turned on, it displays the
channel it was displaying when it was turned off.
Power On Channel
Num
… When the TV is turned on, it switches automatically to this channel.
Power On Channel
Type
…
y Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
cable band), CDTV (digital cable band)
Power On Volume Last Saved
y User Defined : Lets you set the Power On Volume manually. See Power On
Volume below.
y Last Saved : When the TV is turned on, it returns to the volume that had been set
when the power had been turned off.
Power On Volume
Num
… The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Min Volume 0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
Max Volume 100 The maximum Volume Level the user in Stand Alone Hospitality mode.
Power On Source TV Select the input source the TV displays when turns on.
Power On Option Last Option
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to
Stand-by. If it was on, it turns on.
y Power On : When the power returns, the TV turns on.
y Standby : When the power returns, the TV enters the Standby mode.
Channel
Channel Editor
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired
channel number order.
• Apply the video mute to channels you select. The video mute blanks out the video
from a channel and outputs only the sound while displaying a speaker icon on the
screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Channel Bank Editor
Lets you edit the channel bank that works with the item of Channel Bank Service Level
or the Smoovie Remote.
Channel Bank Service
Level
Normal
Set the limitation of access to the TV channels that the patient (or the guest) can watch
with this item. See page 27.
y Normal: All the channels available on the TV are accessible to the patient.
y Bank1/2/3: Only the channels assigned to the selected channel bank in the
Channel Bank Editor are accessible to the patient.
y None: Channels cannot be changed by the patient. (The patient can watch only
one channel set when TV is turned on.)
Dynamic SI OFF
y On : Check the DTV Program channel number. (If Dynamic SI is On, it is not
availale to edit DTV channels in Channel Editor.)
y Off : Does not check the DTV Program channel number. (If Dynamic SI is Off, it
is available to edit DTV channels in Channel Editor, but additional DTV channel
program number update is not supported.)
Channel Auto Store Gives you direct, immediate access to Auto Program for searching channels.
Mute On CC OFF Displays Subtitles on Mute
[HG673-ZA]Install Guide-X0ENG.indd 13 2014-03-07 10:20:17