Samsung HG28NC673AFXZA - Manual (Page 22)

22
English
Category Item initial value Description
Logo/Message
Welcome
Message
OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message
Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time
set in "Logo Display Time".
Hospitality Logo
DL
…
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto
Intialize
OFF
If you set Setting Auto Initialize to On, and the TV's power is turned off and on,
the guest side menu items are restored to their cloned values. See page 30.
REACH Solution
REACH 3.0 OFF
OFF:Close REACH 3.0
ON:Open REACH 3.0"
REACH 2.0 OFF
OFF:Close REACH 2.0
ON:Open REACH 2.0
REACH Channel …
87:Assign a DTV channel number to carry the update REACH data. This channel
number must be the same as the number set on the Reach server.
Group ID …
All:Select the group ID of the REACH server. (Refer to the REACH server manual
for more details)
IPG Room Type …
You can receive up to 3 EPG information headed to the Americas according
to Room Type from SI, and it displays the appropriate channel list and EPG
information according to the value set on TV.For IPG Room Type, there are Default
/ Public / Roomtype3 within the hotel Factory Install menu, and its default value
is Default.
TICKER …
• On : The TICKER content is displayed.
• Off : The TICKER content is not displayed.
REACH Update
Time
…
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
• 1hour : Every hour
• 2hour : Every 2 hours
• 12:00 am : every 12:00 a.m.
• 12:00 pm : every 12:00 p.m.
• 2:00 pm : every 2:00 p.m.
REACH Update
Immediate
…
• On : Whenever the TV enters standby mode (the power cord is plugged in
and the power is off), the REACH data is updated on the TV.
• Off : The REACH data is only updated on the TV at the REACH server update
time.
Room Number … Setting Room Number.
REACH 2.0 TV
Sound
…
• OFF:Close REACH 2.0 TV Sound
• ON:Open REACH 2.0 TV Sound
REACH 2.0 Server
Version
… 0000:Displays the current REACH data version.
DRM
DRM Mode Pro:idiom
Configures CAS support. Applies to only the NB673, NB677, and NB678 models.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom
CAS.
PI AES Data 0xD279 Displays the current state of Pro:Idion AES
PI AES Log OFF
PI AES Log consists of Pro:Idiom AES diagnostic register, here after referred as
AESD, values. These register log will help us diagnose PI key loss issue in the field
and provide solution for it.
View PI AES Log … Displays Pro:Idion AES Log OSD
[HG673-ZA]Install Guide-X0ENG.indd 22 2014-03-07 10:20:19