Samsung LE40F86BD - Manual (Page 23)

english - 21
1. Press the menu button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the
enter/oK button.
2. Select the required option by pressing the ▲ or ▼ button,
then press the enter/oK button.
Available options: mode, equalizer, SrS tS xt, auto
Volume, Internal mute, Sound Select(in
PIP mode), reset (If Game Mode is On)
. When you are satisfied with your setting, press the
enter/oK button.
. Press the exIt button to exit.
♦ mode: Standard/music/movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.
♦ equalizer: balance/100hz/00hz/1khz/khz/10khz
The sound settings can be adjusted to suit your personal
preferences.
If you make any changes to these settings, the sound mode is automatically switched to
"Custom".
♦ SrS tS xt: off/on
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully
compatible with all multichannel formats.
TruSurround XT, SRS and symbol are trademarks of
SRS Labs, Inc. TruSurround XT technology is incorporated
under license from SRS Labs, Inc.
♦ auto Volume: off/on
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ Internal mute: off/on
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The +, - and mute buttons do not operate when the "Internal Mute" is set to On.
When "Internal Mute" is set to "On", the Sound menus except for "Sound Select" (in PIP mode)
cannot be adjusted.
♦ Sound Select: main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
♦ reset
If "Game Mode" is On, the Reset Sound function is activated(refer to page 25). Selecting the
Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
➣
➣
➣
Sound Features
tV
traDemarK & label lICenSe notICe
Manufactured under license from Dolby Laboratorories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Sound
mode : Custom 
equalizer 
SrS tS xt : off 
auto Volume : off 
Internal mute : off 
Sound Select : main 
reset
move enter return
equalizer
balance 100hz 00hz 1khz khz 10khz
move adjust return
tV
r
l
BN68-01312B-Eng.indd 21 2007-08-16 �� 1:00:59