AVerMedia Technologies NV 5000 - Manual (Page 73)

Chapter 3 Configuring the System
74
3.2.2 Camera Setting
Click to set up the cameras.
1. Camera Icons
The bar below shows cameras that are connected to your DVR systems. When
the number inside the camera icon lights up, it means the camera is connected
to the system. A DVR system supports up to 16 cameras.
To set up the camera, just click desired camera icon. When you configure an
appointed camera, the camera icon turns red. Right click to select multiple
camera icons or tick “All” box to select all cameras. When you select all
cameras, the screen inside the window will show “Multiple channels”.
2 Enable
After you select a camera icon, you can decide to enable this camera or not.
Tick the box to enable this camera and then click OK to keep the setting. To
disable the camera, just leave the Enable box blank.