AVerMedia Technologies NV 5000 User Manual
Page 78
AVerMedia NV1000/3000/5000/7000 User’s Manual
Users can define the recording mode in appointed hours according to their
demands. The default setting is always recording which means the blocks on
the time bar are all blue.
You can select one of the recording modes:
Always Recording: The system will record this appointed channel when it
starts to monitor. When it starts to record, a red triangle mark appears at the
upper-left corner on each screen of the channel. The recorded video file will be
kept to the appointed storage path.
Click to set 24-hour recording mode, or you can click
to change
recording mode for each hour separately.
Motion Recording: The system will record once it detects any motion. The
DVR system will record 10 frames before the motion is detected.When it starts
to record, a red triangle mark appears at the upper-left corner on each screen
of the channel. The recording files will be kept to the appointed storage path.
Under this recording mode, the DVR won’t record any video unless it detects
any motion.
Click to set 24-hour recording mode, or you can click
to change
recording mode for each hour separately.
Smart Recording: The system records one frame per second if it does not
detect any motion. When the system detects motion, it will keep on recording
until the motion stops.
Click to set 24-hour recording mode, or you can click
to change
recording mode for each hour separately.
No Recording: The system won’t record this channel’s video.
Click to set 24-hour recording mode, or you can click
to change
recording mode for each hour separately.
Click
to return to “Always recording” if you want to cancel previous
recording mode.