AVerMedia Technologies NV 5000 - Manual (Page 99)

Chapter 3 Configuring the System
100
4. Conditions: This column shows the alarm triggered condition. Tick Motion or
Video Loss boxes as the condition.
Motion: When you click Motion as an alarm condition, the system will treat
motion as an event to trigger the alarm.
Video Loss: When you click Video Loss as an alarm condition, the system
will treat Video Loss as an event to trigger the alarm.
5. Action:
You can set up multiple alarm actions to warn the administrator if the alarm
conditions are satisfied.
Relay Output: Select the relay output numbers. Output relays when the
alarm is triggered.
TV Out: Select this item to output the video to a TV set. The system will skip
to the event channel immediately when an alarm event happens.
Launch E-MAP: The system will launch E-MAP when an alarm event is
happened. The camera icon blinks when the alarm is triggered.
Enlarge Camera View: Tick the box to enable Enlarge Camera View.
Cancel the tick to disable the function. If you select Video Loss as the only
alarm condition, this function will be disabled.
Play Warning Sound: Tick the box to enable Play Sound alarm. Cancel the