Asus Motherboard DSBV-D - Manual (Page 52)

2-32 Chapter 2: Hardware information
DSBV
-D
DSBV-D DIP switches
DIP_SW1 ON:4-PIN FAN
OFF:3-PIN FAN
SW1:CPU_FAN1
SW2:CPU_FAN2
SW3:FRNT_FAN1
SW4:FRNT_FAN2
SW5:FRNT_FAN3
SW6:FRNT_FAN4
SW7:REAR_FAN1
SW8:REAR_FAN2
ON(Default) OFF
ON
1
2
3
4
5
6
7
8
1. DIP switches (DIP_SW1)
This switch allows you to set up the fan connections. Set the switch to ON if
you are using a 4-pin fan (PWM fan) cable plug, or to OFF if you are using a
3-pin (PC fan) plug.
2.7 Switch
The following table shows the corresponding switch for each fan connector.
Switch Fan connector
1 CPU_FAN1
2 CPU_FAN2
3 FRNT_FAN1
4 FRNT_FAN2
5 FRNT_FAN3
6 FRNT_FAN4
7 REAR_FAN1
8 REAR_FAN2
• If you use a 4-pin fan but set the DIP switch for a 3-pin fan, the fan you
installed may not work.
• If you use a 3-pin fan but set the DIP switch for a 4-pin fan, the fan controll
will not work and the fan you installed will always run at full speed.