Asus Motherboard DSBV-D - Manual (Page 57)

ASUS DSBV-D 2-37
7. CPU and system fan connectors (4-pin CPU_FAN1/2, REAR_FAN1/2,
FRNT_FAN1/2/3/4, FBD_FAN1)
The fan connectors support cooling fans of 350 mA ~ 740 mA (8.88 W max.)
or a total of 2.1 A ~ 4.44 A (53.28 W max.) at +12V. Connect the fan cables
to the fan connectors on the motherboard, making sure that the black wire of
each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! Do not place jumper caps on the fan connectors!
8. Power supply SMBus connector (5-pin PSUSMB1)
This connector is for the power supply SMB cable, if your power supply
supports the SMBus function.
DSBV
-D
DSBV-D Fan connectors
CPU_FAN1
CPU_FAN2
REAR_FAN1
REAR_FAN2
FRNT_FAN1
FRNT_FAN2
FRNT_FAN3
FRNT_FAN4
FBD_FAN1
CPU_FAN1 CPU_FAN2
GND FAN Power FAN Speed PWM Control
GND
FAN Power FAN Speed
PWM Control
REAR_FAN1 REAR_FAN2
GND FAN Power FAN Speed PWM Control
FRNT_FAN1 FRNT_FAN2
FRNT_FAN3 FRNT_FAN4
FBD_FAN1
GND FAN Power FAN Speed PWM Control
GND FAN Power FAN Speed PWM Control
GND FAN Power FAN Speed PWM Control
GND
FAN Power FAN Speed
PWM Control
GND FAN Power FAN Speed PWM Control
GND
FAN Power FAN Speed
PWM Control
DSBV
-D
DSBV-D Power supply SMBus connector
PSUSMB1
+3.3V Remote Sense GND NC I2CDA
T
I2CCLK