Samsung LE37R74BD - Manual (Page 10)

English-8
ΠProgramme: Selects a program number for the channel.
ΠColour System: Sets the colour supporting system.
ΠSound System: Sets the sound supporting system. ΠChannel: Selects a channel.
ΠSearch: Scans for the frequency value for the channel.
ΠStore: Saves your settings.
- Storing Channels Automatically
- Storing Channels Manually
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press
the or button to select "Channel", then press the ENTER/OK button.
2. Press the ENTER/OK button to select "Country".
3. Select the appropriate country by pressing the or button. Press the ENTER/OK button to confirm your choice.
4. Press the or button to select "Auto Store", then press the ENTER/OK button.
5. Press the ENTER/OK button.
The TV will begin memorizing all of the available channels.
Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Channel" menu.
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels Automatically
Storing Channels Manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the MENU button to display the menu.
Press
the or button to select "Channel", then press the ENTER/OK button.
2. Press the or button to select "Manual Store", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Programme".
4. To assign a programme number to a channel, find the correct number by pressing the or button
and then press the ENTER/OK button.
You can also set a programme number by pressing the number buttons on the remote control.
5. Press the or button to select "Colour System", then press the ENTER/OK button.
6. Select the colour standard required by pressing the or button then, press the ENTER/OK button.
7. Press the or button to select "Sound System", then press the ENTER/OK button.
8. Select the sound standard required by pressing the or button, then press the ENTER/OK button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the or button to select "Channel". Press the ENTER/OK button. Select C
(Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel.
Select the required number by pressing the or button and then press the ENTER/OK button.
Channel mode: P (Programme mode), C (Air channel mode), S (Cable channel mode)
You can also set a channel number by pressing number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to select "Search".
Press
the ENTER/OK button. Search by pressing the or button and then press the ENTER/OK button.
11. Press the or button to select "Store". Press the ENTER/OK button to select "OK".
12. Repeat steps 3 to 11 for each channel to be stored.
BN68-01007Z-00Eng.indd 8 BN68-01007Z-00Eng.indd 8 2006-08-08 8:27:31 2006-08-08 8:27:31