Samsung LE37R74BD - Manual (Page 18)

English-16
You can set the TV’s clock so that the current time is displayed when you press the INFO button.
You must also set the time if you wish to use the
automatic On/Off timers.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the ENTER/OK button.
2. Press the or button to select "Time", then press the ENTER/OK button.
3. Press the ENTER/OK button to select "Clock Set".
4.
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
You can select a time period of between 30 and 180 minutes after which the
television automatically switches to standby mode.
1. Press the MENU button to display the menu.
Press the or button to select "Setup", then press the ENTER/OK button.
2. Press the or button to select "Time", then press the ENTER/OK button.
3. Press the or button to select "Sleep Timer", then press the ENTER/OK button.
4. Press the or button repeatedly until the desired time appears
(Off, 30, 60, 90, 120, 150, 180). Press the ENTER/OK button.
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
You can set the On/Off timers so that the set will:
Switch on automatically and tune to the channel of your choice at the time you select.
Switch off automatically at the time you select.
The first step is to set the television’s clock.
1. Press the MENU button to display the menu.
Press
the or button to select "Setup", then press the ENTER/OK button.
2. Press the or button to select "Time", then press the ENTER/OK button.
3. Press the or button to select "On Timer", then press the ENTER/OK button.
Switching the Television On and Off Automatically
Setting the Sleep Timer
Setting and Displaying the Current Time
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER/OK button.
Press the...
or button.
or button.
Resetting the Sound Settings to the Factory Defaults
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after
setting the equalizer resets the equalizer setting to the factory defaults.
1. Press the MENU button to display the menu.
Press
the or button to select "Sound", then press the ENTER/OK button.
2. Press the or button to select "Reset", then press the ENTER/OK button.
3. Press the EXIT button to exit.
You can select this option when the "Game Mode” is set to "On".
BN68-01007Z-00Eng.indd 16 BN68-01007Z-00Eng.indd 16 2006-08-08 8:27:41 2006-08-08 8:27:41