Alpine cda-9825 - Manual (Page 12)

10
-EN
Titling Discs/Stations
It is possible to title your favorite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press the DISP/TITLE button and select the title
display mode.
For details, see “Displaying the Title/Text” (page 9).
2
Press and hold the DISP/TITLE button for at least 3
seconds. The first character will blink.
3
Turn the Rotary encoder to select the desired letter/
numeral/symbol available for naming.
4
Press the Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next
letter or symbol of your title.
5
Repeat the steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character, automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters to complete your title, the
4th character space will be blinking. Go to step 6 to
complete the title.
6
Press the DISP/TITLE button to record the title.
NOTES
• If you cancel while entering a title, selected characters are
not written.
• You can enter 18 radio station titles and 18 CD titles on this
unit. If you try to store beyond the limit, the display will show
“FULL DATA.” At this point, no more titles can be stored.
• The CD Changer title length or memory capacity varies
depending upon the model being used.
• To input a new title, one of the previously inputted titles must
first be deleted.
• When you want to erase a title, enter the “ ” symbol into
all spaces.
• The operations described in steps 3 to 5 must be made within
10 seconds. The input mode will be canceled if no action is
taken for over 10 seconds.
Erasing Disc Title/Station Title
1
Press the DISP/TITLE button to select the titling
mode. Then, press and hold for at least 3 seconds.
2
Within 10 seconds press and hold the -/J button for
at least 2 seconds to activate the title scanning mode.
The title in the display will blink.
3
Press the g or f button repeatedly until the title
you want to erase is displayed.
4
Press and hold the -/J button for at least 2 seconds
to erase the title displayed.
5
Press the DISP/TITLE button to cancel the title
erasing mode.
NOTES
• You cannot erase CD-TEXT.
• "NO DATA" is displayed for 2 seconds if the title is not input
in step 2, or if all titles are erased in step 4.
Basic Operation
DISP/TITLE g f
:/J
Rotary encoder