Alpine cda-9825 - Manual (Page 33)

31
-EN
Indication for CD Changer
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• Malfunction in the CD Changer.
- Consult your Alpine dealer. Press the magazine eject
button and pull out the magazine.
Check the indication. Insert the magazine again.
If the magazine cannot be pulled out, consult your Alpine
dealer.
• Magazine ejection not possible.
- Press the magazine eject button. If the magazine does
not eject, consult your Alpine dealer.
• A disc is left inside the CD Changer.
- Press the Eject button to activate the eject function. When the
CD Changer finishes the eject function, insert an empty CD
magazine into the CD Changer to receive the disc left inside
the CD Changer.
• No magazine is loaded into the CD Changer.
- Insert a magazine.
• No indicated disc.
- Choose another disc.
HI TEMP
ERROR - 01
NO MAGZN
ERROR - 02
NO DISC
Indication for CD Player
• Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
• No CD is inserted.
- Insert a CD.
• Mechanism error.
1) Press the c button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
c button again.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.
NOTE
When the “ERROR” is displayed:
In case that the disc cannot be ejected by pressing the c button,
press the RESET switch (refer to page 5) and press the c button
again.
If not ejecting, consult your Alpine dealer.
(CDA-9827/CDA-9826 only)
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
(CDA-9827/CDA-9826 only)
• The disc is not written in a MP3/WMA supported format.
- Use a disc written at the MP3/WMA supported format.
HI TEMP
ERROR
NO DISC
PROTECT
UNSUPORT