AEG L 98485 FL - Manual (Page 12)

The appliance soaks the laundry at 30°C
for about half an hour before to wash.
SPIN BUTTON 11
Touch button 11 to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set pro-
gramme.
• Deactivate the spin phase (' No Spin '
function).
• Activate the ' Rinse Hold ' function.
Set this function to prevent fabric crea-
ses. The appliance does not drain the
water when the programme is comple-
ted.
TEMPERATURE BUTTON 12
Touch button 12 to change the default
temperature.
Symbols - - - and
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, touch button
10 and button 9 at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you touch the buttons and
when a malfunction occurs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, touch button
12 and button 11 at the same time un-
til the display shows the symbol .
• To deactivate the function, touch but-
ton 12 and button 11 at the same time
until the symbol goes off.
You can activate the function:
• Before you touch the button
6 : the
appliance cannot start.
• After you touch the button 6 , all the
buttons and the programme knob are
deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function touch button
8 and button 7 at the same time un-
til the display shows the symbol .
• To deactivate the function touch but-
ton 8 and button 7 at the same time
until the symbol goes off.
12