Before first use, Language setting, Change the language after the first activation – AEG L 98485 FL User Manual
Page 18: Clock setting
BEFORE FIRST USE
1.
To activate the drain system, put 2 li-
tre of water in the main wash com-
partment of the detergent dispenser.
2.
Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start a
programme for cotton at the highest
temperature without laundry. This re-
moves all possible dirt from the drum
and the tub.
LANGUAGE SETTING
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
• Turn the programme knob to set the
desired language.
• When the display shows the necessary
language, touch button
6
to confirm
the selection.
Change the language after the
first activation
1.
Touch button
11
and button
10
at
the same time for some seconds.
2.
When display shows the language
set, turn the programme knob to set
the new language.
3.
Touch button
6
to confirm the se-
lection.
CLOCK SETTING
After you set the language, the display
tells to set the clock:
• The hour digits flash.
• Turn the programme knob to change
the hour.
• Touch button
6
to confirm the selec-
tion.
• The minute digits flash.
• Turn the programme knob to change
the minutes.
• Touch button
6
to confirm the selec-
tion.
Change the time of the day
after the first activation
1.
Touch button
9
and the button
8
at the same time for some seconds.
2.
The hour digits flash.
3.
Turn the programme knob to change
the hour.
4.
Touch button
6
to confirm the se-
lection.
5.
The minute digits flash.
6.
Turn the programme knob to change
the minutes.
7.
Touch button
6
to confirm the se-
lection.
18