Allied Telesis AT-TQ Series - Manual (Page 45)

AT-TQ Wireless Access Point Series User’s Guide
45
Channel Specifies the channel for the radio in the
access point. The number of available
channels varies by radio, mode, and
country. Here are the guidelines:
- At the Auto setting, the access point sets
the channel automatically. The access
point listens on the channels and selects
the one with the least traffic.This is the
default setting.
- You can select a channel from the pull-
down menu. You may select only one
channel.
- The Auto selection is not available if you
use the cluster feature to automatically
assign the channels to the radios in the
access points. For information, refer to
“Using Automatic Channel Assignments”
on page 109.
Station Isolation Enables or disables station isolation.
When station isolation is enabled, the
access point does not allow the wireless
clients of a VAP to communicate with
each other, but does allow them to
communicate with clients in other VAPs
and with the wired LAN.
The feature is disabled when the dialog
box is empty and enabled when the dialog
box has a check mark. The default setting
is disabled.
To activate or deactivate the feature, click
the dialog box to insert or remove the
check mark.
Table 2. Modify Wireless Settings Window (Continued)
Field Description