Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 341)

User Interface Commands
Page 340
Syntax
help
Parameters
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
There are no user guidelines for this command.
Example
The following example describes the help system .
terminal datadump
The terminal data-dump User EXEC mode command enables dumping all the output of a show command
without prompting. Use the no form of this command to disable dumping.
Syntax
terminal datadump
no terminal datadump
Parameters
This command has no arguments or keywords.
Default Configuration
Dumping is disabled.
console# help
Help may be requested at any point in a command by entering a question mark '?'. If nothing
matches the currently entered incomplete command, the help list is empty. This indicates
that for a query at this point, there is no command matching the current input. If the
request is within a command, enter backspace and erase the entered characters to a point
where the request results in a display.
Help is provided when:
1. There is a valid command and a help request is made for entering a parameter or argument
(e.g. 'show ?'). All possible parameters or arguments for the entered command are
displayed.
2. An abbreviated argument is entered and a help request is made for arguments matching the
input (e.g. 'show pr?').