Allied Telesis AT-S94 CLI (AT-8000S Series) - Manual (Page 44)

Page 43
Allied Telesis
AT-8000S-S94-3.0 Command Line Interface User’s Guide
Default Configuration
The local user database is checked. This has the same effect as the command ip http authentication local.
Command Mode
Global Configuration mode
User Guidelines
The additional methods of authentication are used only if the previous method returns an error, not if it fails. To
ensure that the authentication succeeds even if all methods return an error, specify none as the final method in
the command line.
Example
The following example configures the HTTP authentication.
ip https authentication
The ip https authentication Global Configuration mode command specifies authentication methods for HTTPS
server users. Use the no form of this command to return to the default configuration.
Syntax
ip https authentication method1 [method2...]
no ip https authentication
Parameters
•
method1 [method2...] — Specify at least one from the following table:
Default Configuration
The local user database is checked. This has the same effect as the command ip https authentication local.
Command Mode
Global Configuration mode
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.
Console(config)# ip http authentication radius local
K e y w o r d S o u r c e o r d e s t i n a t i o n
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.