Viewing the statistics of radio – Allied Telesis AT-UWC Series User Manual
Page 249
Chapter 5: Wireless LAN
249
4. If you want to refresh the display, click Refresh.
Viewing the
Statistics of Radio
To view the radio statistics about the managed access points, do the
following:
1. From the Navigation pane, go to WLAN > Status/Statistics > Managed
AP, click the Statistics tab, then click the Radio subtab.
The Managed Access Point Radio Statistics page is displayed as
shown in Figure 130 on page 250.
WLAN Bytes
Transmitted
Dropped
Displays the data size in bytes that the access
point has transmitted to the wireless network, but
discarded.
Ethernet Bytes
Received
Displays the data size in bytes that the access
point has received from the LAN.
Ethernet Bytes
Transmitted
Displays the data size in bytes that the access
point has transmitted to the LAN.
Total Receive
Errors
Displays the number of errors that the access point
caused when receiving data from the LAN.
ARP Reqs
Converted From
Bcast to Ucast
Displays the number of ARP requests that the
access point converted from broadcast to unicast.
Broadcast ARP
Requests
Displays the number of ARP requests that are sent
as broadcast messages to VAP’s. One ARP
request can be counted multiple times if multiple
VAP’s broadcast the ARP request.
Central L2
Tunnel Packets
Received
Displays the number of packets that the access
point received from the centralized tunnel.
Central L2
Tunnel Packets
Transmitted
Displays the number of packets that the access
point transmitted to the centralized tunnel.
Central L2
Tunnel Multicast
Packets
Transmitted
Displays the number of multicast packets that the
access point transmitted to the centralized tunnel.
Table 93. Managed Access Point Detail Statistics (Continued)
Field
Description