Http – Allied Telesis AT-UWC Series User Manual
Page 47
Chapter 2: System
47
HTTP
On the HTTP Configuration page, you can view and modify the property
settings for HTTP connections.
To view and modify the HTTP settings, do the following:
1. From the Navigation pane, go to System > Configuration > HTTP.
The HTTP Configuration page is displayed as shown in Figure 30.
Figure 30. HTTP Configuration Page
2. Observe or modify the values in the fields described in Table 4.
Table 4. HTTP Configuration
Field
Description
HTTP Admin
Mode
Displays Enable or Disable. By default, HTTP is
enabled. When you enable HTTPS, HTTP is
disabled. See “Secure HTTP” on page 187.
HTTP Session
Soft Timeout
(Minutes)
Displays the period of time in minutes. When this
specified time has passed since the last user-
interaction to the system, the system ends the
session. The default setting is 5 minutes.
HTTP Session
Hard Timeout
(Hours)
Displays the period of time in hours. When this
specified time has passed since the time you
logged in, the system ends the session. The default
setting is 24 hours.