Allied Telesis AT-UWC Series - Manual (Page 318)

AT-UWC WLAN Controller Web GUI User’s Guide
318
MAC
Authentication Select the MAC authentication mode. To
authenticate clients with the MAC address, the
WLAN Controller or RADIUS server must have a
known client list. The options are:
 Local - Authenticates using the known client
list on the WLAN Controller.
 Radius - Authenticates using the known
client list on a RADIUS server.
 Disable - Does not authenticate clients.
For more information about the know client list, see
“WLAN Advanced Configuration > Known Client” on
page 312.
Wireless ARP
Suppression
Mode Select the Wireless ARP Suppression mode from
the select list. The options are:
 Enable - Suppresses broadcast ARP
messages at the wireless interface.
 Disable - Does not suppress broadcast
ARP messages at the wireless interface.
L2 Distributed
Tunneling Mode Select the L2 Distributed Tunneling mode from the
select list. The options are:
 Enable - Supports Distributed L2 Tunneling
for AP clients.
 Disable - Does not support Distributed L2
Tunneling.
RADIUS
Authentication
Server Name Specify the name of RADIUS server for
authentication. When the RADIUS Use Network
Configuration on the page is enabled, this RADIUS
server overrides the setting in the WLAN Basic
Setup page. See “WLAN Basic Setup > Global” on
page 191.
You must use the server name as it was added to
the RADIUS Named Server list. See “RADIUS
Server Configuration” on page 175.
The WLAN Controller performs RADIUS
transactions in behalf of access points and AP
clients.
Table 134. Wireless Network Configuration (Continued)
Field Description