AMD HYPERTRANSPORT 8151 - Manual (Page 5)

5
25912 Rev. 3.06 March 2006 AMD-8151™ HyperTransport™ AGP3.0 Graphics Tunnel
Revision Guide
AMD-8151™
HyperTransport™ AGP3.0
Graphics Tunnel
Revision Guide
The purpose of the AMD-8151™ HyperTransport™ AGP3.0 Graphics Tunnel Revision Guide is to
communicate updated product information on the AMD-8151™ HyperTransport™ AGP3.0 graphics
tunnel to designers of computer systems and software developers. This guide consists of three major
sections:
• Revision Determination: This section, which starts on page 6 , describes the mechanism by
which the current revision of the part is identified.
• Product Errata: This section, which starts on page 7 , provides a detailed description of product
errata, including potential effects on system operation and suggested workarounds. An erratum is
defined as a deviation from product specifications, and as such may cause the behavior of the
AMD-8151 HyperTransport AGP3.0 graphics tunnel to deviate from the published specifications.
• Documentation Support: This section, which starts on page 15 , provides a listing of available
technical support resources.
Revision Guide Policy
Occasionally, AMD identifies product errata that cause the AMD-8151 HyperTransport AGP3.0
graphics tunnel to deviate from published specifications. Descriptions of identified product errata are
designed to assist system and software designers in using the AMD-8151 HyperTransport AGP3.0
graphics tunnel. Furthermore, this revision guide may be updated periodically.