Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 333)

AlliedView™-EMS 4.0.3 Device Management Guide Page 333 of 468
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Interface Info
Standard
Displays high-capacity port statistics including received and transmitted
unicast/multicast/broadcast packets on the port, link up/down trap and port
speed.
Note - The following parameters are not applicable to the AT-x600 series
and should be ignored:
•
Specific Media MIB
•
Received Non Unicast Packets
•
Transmitted Non Unicast Packets
•
Transmitted Buffer Length
Note - Device Manager will not display the correct state of the ports and
duplex LEDs if logged-on in SNMPv3 mode using a user account with no read
access to the Interface Info parameters.
Additional Info
Displays port statistics such as the number of frames received and
transmitted on the port, bytes received and transmitted on the port, and
port status.
Note - The current firmware version returns a 'noSuchName' value for the
following parameters:
•
Received Bytes (HC)
•
Received Unicast Packets (HC)
•
Received Multicast Packets (HC)
•
Received Broadcast Packets (HC)
•
Transmitted Bytes (HC)
•
Transmitted Unicast Packets (HC)
•
Transmitted Multicast Packets (HC)