Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 420)

AlliedView™-EMS 4.0.3 Device Management Guide Page 420 of 468
Note - The current firmware version returns alphanumeric values for
the TLV Support and Current TLV Supported parameters instead of
strings representing bits.
Network Policy Info
Displays per port policy type information for a particular physical
network connection.
Note - The current firmware version does not return any value for
the Application Type parameter.
Note - The current firmware version returns a '???(0)' value for the
Policy Tagged parameter.
Inventory Info
Displays inventory information for the remote devices connected to
the ports.
Location Info
Displays the Location information as advertised by the remote
system.
POE Info
Displays information about PoE type of the remote devices connected
to the ports.
POE/PSE Info
Displays information about Extended PoE PSE information for the
remote devices connected to the ports.
POE/PD Info
Displays information about XPoEPD information as advertised by the
remote system.
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission
of IEEE 802.3.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the 802.3 TLVs Tx Enable parameter will not be configurable and will
display an 8-bit binary string instead of the actual TLV types allowed.
However, the TLV types allowed can still be determined by looking at the
bits that are on from left to right: