Stacking menu – Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual
Page 104
AlliedView™-EMS 4.0.2 Device Management Guide
Page 104 of 441
Enable
Enables the port.
Disable
Disables the port.
Port Mirroring
Displays port mirroring parameters and allows configuration of port mirroring state
and port's source list.
Note
- Valid MIB Set values for the Port Mirroring Configuration Entry Status
parameter are 'active', 'not in service' and 'destroy'. Attempting to set this
parameter to any other value will result in the error message: "The error occurred
with 'Set' operation. Error: bad value.".
Stacking Menu
From the Stacking menu, you can view basic switch information as well as stacking
information.
Stacking Info
Displays information such as Stack Switch ID, Stack Switch MAC Address, Stack
Switch Name, Stack Switch Mode, Stack Switch Software Version and Stack Switch
Model for all switches in the stack.
AT-8400