Allied Telesis AlliedView-EMS 4.0.2 Device-Manager User Manual
Page 78
AlliedView™-EMS 4.0.2 Device Management Guide
Page 78 of 441
Note
- The current firmware version does not allow Flood BPDU Method
parameter to be set to 'bridging' as its value.
MSTP
Basic Info
Displays the basic information about MSTP.
Instance Info
Displays information that contains MSTP instance specific information for the
Multiple Spanning Tree Protocol.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.
Bridge Port Info
Displays statistics about frames received/transmitted on the switch port.
Note
- The current firmware version does not allow Number of Traffic Class
parameter to be configured.
Note
- The current firmware version returns the value 'NULL' for the Circuit
parameter.
802.1p
Device Capabilities
Displays information on the device capabilities.
Port Priority Group
Displays information about the port priority.
Traffic Class
Displays information about the traffic class and traffic class priority.
Note
- Valid MIB Set values for Traffic Class parameter are in the range [0-3]
inclusive. Attempting to set this parameter to a value outside of the valid range will
result in the error message: "The error occurred with 'Set' operation. Error: bad
value."
MAC Table Info
Displays MAC table information.
MAC Base Priority Support
Displays which features of the max base priority are supported.