Allied Telesis AT-S63 - Manual (Page 321)

321
Chapter 29
Internet Protocol Version 4 Packet
Routing
This chapter describes Internet Protocol version 4 (IPv4) packet routing on
the AT-9400 Basic Layer 3 Switches. The chapter covers routing
interfaces, static routes, and the Routing Information Protocol (RIP)
versions 1 and 2. The sections in the chapter include:
ˆ “Supported Platforms” on page 322
ˆ “Overview” on page 324
ˆ “Routing Interfaces” on page 326
ˆ “Interface Names” on page 329
ˆ “Static Routes” on page 330
ˆ “Routing Information Protocol (RIP)” on page 332
ˆ “Default Routes” on page 334
ˆ “Equal-cost Multi-path (ECMP) Routing” on page 335
ˆ “Routing Table” on page 337
ˆ “Route Selection Process” on page 338
ˆ “Address Resolution Protocol (ARP) Table” on page 339
ˆ “Internet Control Message Protocol (ICMP)” on page 340
ˆ “Routing Interfaces and Management Features” on page 342
ˆ “Local Interface” on page 345
ˆ “AT-9408LC/SP AT-9424T/GB, and AT-9424T/SP Switches” on
page 346
ˆ “Routing Command Example” on page 348
ˆ “Non-routing Command Example” on page 352
ˆ “Upgrading from AT-S63 Version 1.3.0 or Earlier” on page 354