Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 229)

AlliedView™-EMS 3.11 Device Management Guide Page 229 of 402
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Time and Date parameter will display a sequence
of bytes in hexadecimal format instead of the actual date and time of day.
Note - The Time and Date and Initial Load Parameter parameters are
implemented as 'read-only'.
Logical Storage Areas
Displays resource information about the storage devices.
Note - The Storage Size parameter is implemented as 'read-only'.
Devices
Displays resource information about the devices installed in the host.
Hardware Info
Total Boards
Displays the number of boards that are currently installed.
Board Info
Displays basic information on the boards that are currently installed.
Slot Info
Displays information on the Power Supply Bay slots.
Physical Interfaces
Displays information about the interfaces found in the device.
Note - The Per Board submenu will appear under the Physical Interfaces
menu if one or more PIC/s in the Network Service Module is/are installed.
Firmware Info
Install Configurations
Displays information about the Software release currently loaded in the
device.
Note - The current firmware version returns a 'noSuchName' value for the
Release File Exists? and Patch File Exists? parameters.
Install History
Displays information about the install history.
Configuration File
Displays the Configuration file name.
Release Licenses
Displays a list of software releases installed on the switch.