Allied Telesis AlliedView-EMS 3.10 QoS MANAGER User Manual
Page 22
SNMP
Version
This drop down list allows you to select the SNMP version to use in
managing the target device.
Note
- Before choosing "v2c" or "v3", make sure that the target device
you are connecting to supports SNMP v2c and/or SNMP v3 respectively.
Settings
If the Version is set to "v1" or "v2c", this button opens the SNMP v1/v2c
Settings window. Otherwise, if the Version is set to "v3", this button
opens the SNMP v3 Settings window.
SNMP v1/v2c Settings dialog box
Community Name
The community strings to use in performing SNMP operations on the
target host. There are two types of community strings for SNMP. Be sure
to specify strings which match the ones configured on the target host.
By default, the following strings are used:
for the 'Get' operation
public
for the 'Set' operation
private
AlliedView™-EMS 3.10 QoS Manager User’s Guide
Page 22 of 128