Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 94)

6.7.2.2 Add/Modify Flow Group
Property
Name
Description Valid Values
Flow
Group ID
(cannot be
modified)
Specifies the unique
identifier for the Flow
Group. Range: 0-1023
Description Specifies a brief
description of the Flow
Group.
To set this value, enter an alphanumeric
string from 1-15 characters.
Mark Value This parameter specifies a
replacement value to
write into the DSCP
(TOS) field for all packets.
Range: none, 0-63
Action Specifies the action to be
performed on traffic
belonging to the Flow
Group.
This can be set by selecting any one of
the following values:
• FORWARD
• FORWARD,SENDMIRROR
• DISCARD
• SENDMIRROR
• SENDMIRROR,SENDVLANPORT
• SENDVLANPORT
• none
Port Specifies the port where
traffic is sent when
action=sendvlanport. The
port must belong to the
VLAN specified by the
vlan parameter
This can be set by selecting any one of
the following values:
• port 1 - n (n = number of ports
available)
• none
Premarking Specifies the action to
take on the flow group
before traffic class
bandwidth metering is
applied. Values for
premarking and
markvalue in a Flow
Group override the
setting for the Traffic
Class.
• USEMARKVALUE
• USEDSCP
• none
VLAN Specifies where traffic is
sent when
action=sendvlanport.
Traffic is sent out the port This can be set by selecting from a list of
available VLANs.
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 94 of 128