Allied Telesis AlliedView-EMS 3.10 QoS MANAGER - Manual (Page 28)

A Summary window will be displayed. The Summary window will contain a list
of QoS elements and settings that will be created by the Quick Setup function.
After confirming the message, you will be returned to the QoS Information
Window where you can do further revisions to or fine-tuning on the newly
created QoS elements.
Note that the Quick Setup function is only available for QoS-based devices.
5.2.2 Refresh
The Refresh operation will force QoS Manager to retrieve all QoS/CoS
configurations from the device. Note that performing a Refresh operation will
wipe out any settings which have not yet been applied to the device.
Before a Refresh operation is performed, you will be prompted with a
confirmation box. Upon confirmation, the refresh will start. While the Refresh
operation is in progress, a progress window will be displayed. Once completed,
the progress window will close and the contents of the QoS/CoS Information
Window will now be updated with the latest settings from the device.
Note that the Refresh operation is only available if QoS Manager is already
connected to a target host.
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 28 of 128