Allied Telesis AT-S60 - Manual (Page 749)

AT-S60 Management Software User’s Guide
Section VI: Web Browser Management 749
Displaying
Access Table
Entries
To display entries in the SNMPv3 Access Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the SNMP Tab.
The SNMP Monitoring Tab is shown in Figure 195 on page 596.
3. From the SNMP Monitoring Tab, click the circle next to View Access
Table.
4. Click View at the bottom of the page.
The Monitoring, SNMPv3 Access Table Page is shown in Figure
269.
Figure 269 Monitoring, SNMPv3 Access Table Page