Displaying vlans – Allied Telesis AT-S60 User Manual
Page 763
Advertising
AT-S60 Management Software User’s Guide
Section VI: Web Browser Management
763
Displaying VLANs
To display all the existing VLANs on a switch, perform the following
procedure:
1. From the Home Page, select Monitoring.
The Monitoring System Page is displayed with the General Tab
selected by default, as shown in Figure 194 on page 592.
2. Select the Layer 2 option.
The Monitoring Layer 2 Page is displayed with the MAC Address
Tab selected by default, as shown Figure 212 on page 634.
3. Select the VLAN Tab.
The Monitoring VLAN Tab is shown in Figure 279.
Figure 279 Monitoring Layer 2 Page, VLAN Tab
4. Click on View Port Based VLANs.
Advertising