Allied Telesis AT-S60 - Manual (Page 205)

AT-S60 Command Line User’s Guide
203
ENABLE GARP
Syntax
enable garp=gvrp [gip]
Parameters
garp Specifies the GARP application you want to enable.
The only GARP application supported by AT-S60
management software is GVRP.
gip Enables GARP Information Propagation (GIP).
Note
The online help for this command contains an STP option. The
option is not supported.
Description
This command enables GVRP on the switch. Once activated, the switch
will learn dynamic GVRP VLANs and dynamic GVRP ports.
This command can also be used to enable GIP.
Examples
This commands enables GVRP on the switch:
enable garp=gvrp
This command enables GIP only:
enable garp=gvrp gip