Allied Telesis AT-S60 User Manual
Page 76
Advertising
Chapter 5: SNMP Community Strings and Trap Commands
74
The following command creates the new community string “wind11”
with read and write access level. To limit the use of the string, it is given
an access status of closed and assigned the IP address of a management
workstation:
create snmp community=wind11 access=write open=no
manager=149.35.24.22
(The OPEN=NO parameter could be omitted from the example since
closed status is the default for a new community string.)
This command is identical to the previous example and adds the IP
address 149.35.24.78 as a trap receiver:
create snmp community=serv12 access=write open=no
traphost=149.35.24.78 manager=149.35.24.22
Advertising