Allied Telesis AT-8116 - Manual (Page 31)

6-1
Chapter 6
Address Resolution Commands
get-arp-tbl
Shows ARP table. The Address Resolution Protocol (ARP) table
contains information that shows the maping of IP addresses to MAC
addresses and interface numbers.
SYS_console>get-arp-tbl
IfIndex IpAddress MAC Address
=============================================
8 194.090.136.126 00-20-AF-C9-EB-23
SYS_console>
del-arp-entry
SYS_console>del-arp-entry {<IPaddress>|*}
Deletes entries from the ARP table. If an IP address is specified, the
matching arp entry will be deleted. If * is specified, the entire ARP
table will be flushed. This command should be used if the network
topology has physically changed, e.g. if a management station has
been moved from one segment to another, thus changing its
interface number.