Allied Telesis AT-8324 User Manual
Page 74
Translated Electrical Safety and Emission Information
74
Standards: This product meets the following standards.
" 1
RFI Emission
EN55022 Class A
" 2
WARNING: In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
" 3
Immunity
EN50082-1 1997
" 4
Electrical Safety
EN60950, UL 1950, CSA 950
" 5
Laser
EN60825
SAFETY
" 6
WARNING: Class 1 Laser product.
" 7
WARNING: Do not stare into the laser beam.
" 8
ELECTRICAL NOTICES
WARNING: ELECTRIC SHOCK HAZARD
To prevent ELECTRIC shock , do not remove the cover. No user-serviceable parts inside. This
unit contains HAZARDOUS VOLTAGES and should only be opened by a trained and qualified
technician. To avoid the possibility of ELECTRIC SHOCK, disconnect electric power to the
product before connecting or disconnecting the LAN cables.
" 9
LIGHTNING DANGER
DANGER: DO NOT WORK on equipment or CABLES during periods of LIGHTNING ACTIVITY.
" 10
CAUTION: POWER CORD IS USED AS A DISCONNECTION DEVICE. TO DE-ENERGIZE EQUIPMENT,
disconnect the power cord.
" 11
ELECTRICAL - TYPE CLASS 1 EQUIPMENT
THIS EQUIPMENT MUST BE EARTHED. Power plug must be connected to a properly wired earth
ground socket outlet. An improperly wired socket outlet could place hazardous voltages on
accessible metal parts.
" 12
PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be
easily accessible.
" 13
CAUTION: Air vents must not be blocked and must have free access to the room ambient air
for cooling.
" 14
OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of
40° degrees C.
" 15
ALL COUNTRIES: Install product in accordance with local and National Electrical Codes.
U.S. Federal Communications Commission
RADIATED ENERGY
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with this instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
Note: Modifications or changes not expressly approved by the manufacturer or the FCC can
void your right to operate this equipment.
Industry Canada
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.