Allied Telesis FORMULA 8200 - Manual (Page 114)

Command Reference
5-36
SNMP/CONFIG Example
To configure the SNMP agent parameters:
Use the SNMP/CONFIG command.
A similar display appears:
/SNMP >config
SNMP Agent configuration:
System contact (): james
System location (): Sales, bldg 3
Read community string (public):
Write community string (private):
SNMP Trap Destination Table is empty.
Enter A=add, C=change, D=delete, Q=quit: a
IP Address: 123.251.789.111
UDP Port Number (default 162): 56
Community string:
Enter A=add, C=change, D=delete, Q=quit:
/SNMP >
SNMP Trap Destination Table
Index
------- IP Address
------------ UDP Port
---------- Community
-----------
1. 123.200.21.111 56 public