Allied Telesis FORMULA 8200 - Manual (Page 95)

FORMULA 8200 User’s Guide
5-17
ETHERNET Command
Syntax
ETHERNET
ETHERNET/CONFIG/<subcommand>
ETHERNET/SHOW/<subcommand>
Menu
Description
The ETHERNET command allows you to configure and display
Ethernet port information, and allows you to configure port
mirroring. Table 5-5 describes the parameters in that display.
/ethernet
== ETHERNET MENU ==
[SHOW] [CONFIG]
Table 5-5 ETHERNET Command Parameters
Subcommand Alias Description
SHOW PORT vep
Show Ethernet interface unit (EIU) port configuration.
STAT ves
Show EIU statistics configuration.
COUNT est
Show EIU statistics and counters.
MACADDRCOUNT srccnt
Show total number of MAC addresses in the source table.
CONFIG CLEAR epclr
Clear Ethernet statistics counters for a specific port.
PORT epcfg
Configure Ethernet port parameters.
RXMIRROR
rsm
Set the receive (RX) mirror port.
SETSNOOP snp
Set the snoop port.
SNOOPMIRROR snpm
Show snoop and mirror ports.
STAT PORT estcfg
Display the Ethernet statistics configuration menu.
TXMIRROR txm
Set the transmit (TX) mirror port.
FLUSH Display the flush menu.
FLUSH PORTFLU pf
Flush all Ethernet entries per port