Allied Telesis FORMULA 8200 - Manual (Page 72)

Operating and Managing the FORMULA 8200 Switch
4-26
Displaying RIP Support Information
The FORMULA 8200 IP routing function is implemented on an
individual-VLAN basis. When a VLAN is created, the FORMULA 8200
provides an option to configure its interface as an IP router and
allows the network manager to choose from four RIP modes: active
(send and receive RIP packets), deaf (send only), inactive (RIP
disabled) or silent (receive only).
To display routes:
Use the INET/SHOW/ROUTE command.
/INET/SHOW/ROUTE
ROUTE NET TABLE:
Address
============ Gateway
============= Metric
====== VLAN
===== Type
==============
192.18.29.0 192.18.29.200 1 1 VLAN INTERFACE
192.18.30.0 192.18.30.200 1 2 VLAN INTERFACE
ROUTE HOST TABLE:
Address
============ Gateway
============= Metric
====== VLAN
===== Type
==============
132.10.10.1 192.18.29.200 2 1 STATIC
131.20.20.1 192.18.29.200 1 1 STATIC
193.10.10.1 192.18.29.200 1 1 STATIC
127.0.0.1 127.0.0.1 1 1 LOOPBACK