Allied Telesis AT-S41 - Manual (Page 114)

AT-S41 User’s Guide
114
Viewing the MAC Addresses of a VLAN
The procedure in this section can be useful if you created VLANs on the
switch and want to view the MAC addresses of the nodes of a particular
VLAN. (This procedure is not of much value if the switch contains only
the Default VLAN, in which case displaying the entire MAC address table,
as explained earlier in this chapter, produces the same result.)
Note
To perform this procedure, you need to know the VLAN ID number
of the VLAN whose MAC addresses you want to view.
To view the MAC addresses of a VLAN on the switch, perform the
following procedure.
1. From the Main Menu, type B to select Basic Switch Configuration.
2. From the Basic Switch Configuration Menu, type F to select
Forwarding Database.
3. From the Forwarding Database Menu, type V to select Display MAC
Address by VID.
The following prompt is displayed:
Enter VLAN ID>
VLAN ID is in range of 1 to 4094
4. Enter the VLAN ID of the desired VLAN and press Return.
The management software displays a menu with a list of the MAC
addresses of the end nodes in the VLAN. For an example of the
menu and for definitions of the columns, refer to the Display
MAC Address by MAC Menu on page 111.