Allied Telesis AT-S41 - Manual (Page 201)

AT-S41 User’s Guide
201
Phase 2 This phase explains how to convert the tagged ports that you added to
the new VLAN into untagged ports. This process involves changing the
PVIDs of the ports so that they match the VID of the new VLAN. For
example, if you assigned the new VLAN a VID of 4, you must change the
PVIDs of the ports you want to be untagged ports in the new VLAN to 4.
The following procedure explains how to accomplish this.
1. Click on the Advanced Config menu tab and select VLAN Config from
the sub-menu. Select VLAN Port Config from the next sub-menu.
The VLAN Port Configuration page will appear, as displayed in
Figure 78.
Figure 78 VLAN Port Configuration
This page lists the ports on the switch and each port’s current PVID
assignment. For example, in the figure above, Ports 1 to 6 all have a
PVID of 1, meaning that they are untagged members of the Default
VLAN, which has a VID of 1.
By default, this page initially displays the PVIDs for the ports on the
master switch.
2. Use the Stack ID pull-down menu to select a different switch in the
stack that contains ports that you want to identify as untagged ports
of the new VLAN.
3. Enter a new PVID value in the PVID field for the port number whose
PVID you want to change.