Allied Telesis AT-S41 - Manual (Page 79)

AT-S41 User’s Guide
79
Disabling Port Monitoring
To disable port monitoring, perform the following procedure:
1. From the Main Menu, type A to select Advanced Switch
Configuration.
2. From the Advanced Switch Configuration Menu, type M to select Port
Monitoring Configuration.
The Port Mirroring Menu is displayed, as shown in Figure 21 on
page 76.
3. Type E to select Enable/Disable Port Monitoring.
The following prompt is displayed:
Enable or Disable monitoring (E/D)>
4. Type D for Disable.
5. The port monitoring status will change to Disabled on the Port
Monitoring Configuration Menu.
The port monitoring on the switch is disabled. The port that was
functioning as the monitoring port is now available for normal
network operations.