AGFA 1 - Manual (Page 44)

: ANAPURNA XL² OPERATOR MANUAL
A B]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] 44 ] 8/08/2008 ]
11.2.5. UV Options:
See chapter “6.2. Curing setup and sequences”, for detailed info.
11.2.6. Head Gap Control:
See chapter “10.1. Automatic “Head Base Height” Setup”, for detailed info.
11.2.7. Units:
With this setting you change the units between mm and inches.
11.2.8. Weep:
This option allows the user to disable the weeping of (color) ink when the shuttle
is set in purge position. Agfa’s advise is to leave the option permanently ON
Agfa’s advise is to leave the option permanently ON Agfa’s advise is to leave the option permanently ON Agfa’s advise is to leave the option permanently ON; The
used Spectra Galaxy heads require weeping of ink to keep the nozzles open during
a stand-still of the carriage.
If the choice is changed, a parameter download is necessary to activate the
change;