Blodgett KLT-E Series - Manual (Page 7)

OM-KLT-E 5
Inspection & Unpacking
CAUTION
SHIPPING STRAPS ARE UNDER TENSION
AND CAN SNAP BACK WHEN CUT. TAKE
CARE TO AVOID PERSONAL INJURY OR
DAMAGE TO THE UNIT BY STAPLES LEFT
IN THE WALLS OF THE CARTON.
The unit will arrive in a heavy shipping carton and will be bolted or banded to a skid.
Immediately upon receipt, inspect the carton carefully for exterior damage.
Carefully cut any polyester straps around the carton and detach the sides of the box
from the skid. Pull the carton up off the unit. Thoroughly inspect the unit for concealed
damage. Report any shipping damage or incorrect shipments to the delivery agent.
Write down the model number, serial number, and installation date, and retain this
information for future reference. Space for these entries is provided at the top of the
Service Log at the back of this manual. Keep this manual on file and available for
operators to use.
When installation is to begin, carefully cut any straps which hold the unit on the skid.
Lift the unit straight up off the skid. Examine packing materials to be sure loose parts
are not discarded with the materials.
CAUTION
THIS UNIT IS VERY HEAVY. INSTALLER
SHOULD OBTAIN HELP AS NEEDED TO LIFT
THIS WEIGHT SAFELY
Rear View
DEE/4
Pressure/Vacuum
Gauge
Water Gauge
Glass
Safety
Valve
Pressure/Vacuum
Gauge
Water Gauge
Glass
Safety
Valve