Swiftech H20 120 T User Manual

Page 27

Advertising
background image

Type of Coolant:

For best performance, use 95% distilled water, and 5% Swiftech brand “HydrX” corrosion inhibitor (available here:

http://www.swiftnets.com/store/category.asp?CatID=2

, under the “accessories” section).

In all cases, you must use Distilled water and a corrosion inhibitor with the MCW5002 water-block. Regular automotive
anti-freeze is acceptable. Automotive manufacturers recommend that not less than 25% is used.

NEVER use tap water, even for a short-term test.

Not following the above instructions constitutes misuse (*) of the product, and will void your warranty.

Final inspection
Once the installation is completed, it is always a good idea to test the circuit for leaks, prior to powering up the computer. Troubleshooting
help is available on our web site at

www.swiftnets.com

, or by calling customer support at 562-595-8009.

Rouchon Industries, Inc., dbA Swiftech™ – 1703 E. 28

th

St, signal Hill, CA 90755, USA – T (562) 595-8009 – F (562) 595-8769 – All content Copyright

Swiftech 2004 – Last edited 12-9-04 – Subject to revision without notice

- 27 of 37 -

Advertising