Swiftech H20 120 T User Manual
Page 35
Rouchon Industries, Inc., dbA Swiftech™ – 1703 E. 28
th
St, signal Hill, CA 90755, USA – T (562) 595-8009 – F (562) 595-8769 – All
content Copyright Swiftech 2004 – Last edited 12-9-04 – Subject to revision without notice
- 35 of 37 -
Figure 4
Figure 5
Squirt a generous amount of grease onto the socket.
Force the grease inside of the pin holes with your finger. Make
sure that the central area of the socket is completely filled with
grease.
c.
CPU and cooler installation:
Preamble: The MCW5002-64T requires the AMD recommended motherboard backing plates (made out of metal) for its installation.
Some motherboard manufacturers use plastic back plates and snap-rivets to attach the CPU holding frame to the back-plate, which
cannot be used with the MCW5002-64T. AMD recommended backing plates and retention frames are available online on our site at:
Part # AJ00264 backing plate alone
Part # AJ00172 complete retention frame & backing plate
Figure 6
Figure 7
Remove the peel-off paper back from the motherboard gasket, and install
Insert the processor into the socket.